On December 24, the office will have reduced hours and be closed on December 25.

Labconco RXPert Double Filtered Balance System

Labconco RXPert Double Filtered Balance System

This double-filtered balance system is a Class I biological safety cabinet that contains airborne particulates and powders, providing user protection during hazardous drug compounding or pharmaceutical manipulation. It is designed to meet the USP <800> requirements for non-sterile hazardous compounding. This system exhausts air through two levels of HEPA filtration, returning it safely to the lab. Both filters are 100% scannable and can be replaced using a true bag-in/bag-out system. No outside ducting is required.

 

*Base stand not included*

 

2 ft Product Dimensions: W 24.0" × D 29.0" × H 50.5"

 

3 ft Product Dimensions: W 36.0" × D 29.0" × H 50.5"

 

4 ft Product Dimensions: W 48.0" × D 29.0" × H 50.5"

 

5 ft Product Dimensions: W 60.0" × D 29.0" × H 59.8"

Frequently Bought Together

Ohaus Guardian 7000 Hot Plate with Stirrer, 7 x 7

Ohaus Guardian 7000 Hot Plate with Stirrer, 7 x 7

Pack Size:
EA
Ohaus Guardian 5000 Hot Plate with Stirrer

Ohaus Guardian 5000 Hot Plate with Stirrer

Size:
7" x 7"
Labconco RXPert Single Filtered Balance System

Labconco RXPert Single Filtered Balance System

Size:
4 ft
ProFiller 3600 Fixed Combo

ProFiller 3600 Fixed Combo

Size:
Sizes 00,0,1
Ohaus Adventurer Series Balance, 420 × 0.001 g, NTEP

Ohaus Adventurer Series Balance, 420 × 0.001 g, NTEP

Pack Size:
EA
Air Science Purair Basic and RX Series HEPA Filter

Air Science Purair Basic and RX Series HEPA Filter

Pack Size:
EA
ProFiller 1100 Full System

ProFiller 1100 Full System

Size:
Size 000
Labconco Telescoping Base Stand with Casters

Labconco Telescoping Base Stand with Casters

Size:
4 ft
  • Comes with an 8-foot cord and a built-in analog airflow monitor
  • Two exhaust HEPA filters, 99.99% efficient on particles 0.3 µm (microns) in size
  • Easy 100% leak-detection scanning of both HEPA filters without altering or removing impellers or filters
  • True bag-in/bag-out HEPA filter disposal system allows for safe filter replacement
  • Front-mounted pressure gauge helps determine HEPA filter loading
  • Built-in airflow monitor alerts the user to face velocities outside of preset range
  • Upper dilution air supply sweeps clean air to the back of sash to keep contaminants away from the operator
  • Upper containment sash foil directs contaminants away from the user’s breathing zone
  • Clean-Sweep air foil allows air to sweep the work surface to maximize containment
  • Side-entry airfoils allow air to sweep interior surfaces to enhance containment
  • The positive pressure impeller is surrounded by a negative pressure plenum so that if a leak should develop, the unfiltered air is captured and re-filtered
  • Rear baffle with zones of perforations promotes horizontal laminar airflow. The baffle pivots down for cleaning
  • Ergonomic angled sash for comfortable viewing
  • Quiet operation as low as 48 decibels
  • Deep 23.4-in interior easily accommodates large analytical balances
  • Built-in impeller has vibration isolation supports to minimize disturbance to sensitive balances
  • The 1/4 in-thick tempered safety glass provides better fire, scratch and chemical resistance than acrylic and dissipates static charge
  • Two 1.5-in utility ports with iris openings allow passage of tubing, electrical cords and cables from inside to back exterior for connection to services